You have no items in your shopping basket.
Exitex Slimline Threshold Sill - Various Finishes
Quick Overview
Product Information
For inward or outward opening doors
Under door clearance 18mm
Suitable for moderate exposure
Suitable for double doors
For inward or outward opening doors
Under door clearance 18mm
Suitable for moderate exposure
Suitable for double doors
Description
Fitting Instructions: Remove rubber seal from aluminium sill section. Check width between inside faces of the doorframe rebate and cut aluminium section to this size, cutting at opposite end to the replacement seal hole. Cut the rubber seal to the length of the aluminium and re-insert into the groove in the sill. This sill requires an under door clearance of 18mm. If necessary, remove door and trim to allow for this ensuring bottom of door is smooth. Position the assembled sill between the doorframe and mark fixing points through countersunk holes. Remove sill, drill fixing holes and insert plugs. Ensure rubber seal at rear is in-situ and screw sill into place.